Driver YKA2304ME |
|
Mã sản phẩm: | YKA2304ME |
Xuất xứ: | ... |
Thương hiệu: | ... |
Lượt xem: | 1.694 |
Trạng thái: | Còn hàng |
Liên hệ |
|
Liên hệ |
Driver YKA2304ME là driver dùng cho Motor bước 2 phase- 6 dây .
Đặc điểm: Điều khiển các motor 6 dây tốc độ cao như các motor trong ROBOCYLINDER…
Phù hợp với các motor 6 dây dòng định mức I<=3A, diện áp 18-40V.
————————————————————————————————————–
- With a 12/8 shift angle constant torque subdivision, up to 64 segments
- Uses a unique control circuit, effectively reducing the noise, increased rotational stability
- Maximum response frequency of up to 200Kpps
- Stepping pulse stops over 100ms, the coil current is automatically reduced by half, reducing the number of occasions the motor overheating
- Bipolar constant current chopping mode, so that the same motor can output more speed and power
- Optically isolated signal input / output
- Drive current from 0.0A / phase to 3.0A / phase continuously adjustable
- 3.0A phase current can drive any of the following two-phase hybrid stepper motors
- Single power supply voltage range: DC12-40V
- Error protection: a) thermal protection; b) over-current, low voltage protection
- Volume 25x136x92mm2, a weight of 0.3kg
Typical applications: engraving machine, laser marking machine, laser engraving machine, small electronic equipment, packaging machines
Overview:
YKA2304ME a constant angle and constant torque stepper drive high-performance segments, the driving voltage DC12-40V, single power supply. 6 or 8 outlet adapter current 3A at an outer diameter of 42-86mm of various models of two-phase hybrid stepping motor. The internal drive bipolar constant current chopping mode, the motor run more smoothly; increase the drive power supply voltage so that the high-speed performance and driving capability of the motor greatly improved; while stepping pulse stops over 100ms, the coil current is automatically reduced by half, the drive of the heat can be reduced by 50%, which makes the heat of the motor is reduced. Pulse frequency is not only used in times of high low high segments, up to 64 segments, improve the accuracy of the stepper motor operation, reduced vibration, noise reduction.
Không có bình luận