Work surface tester ST-4 SIMCO

 

SIMCO surface resistance meter ST-4 relatively rare hand-held type, hold the switch for about 15 seconds to show the product surface resistance value. ST-4 is easy to carry, easy to operate, the test placed on the surface of the measured object can test the surface resistance of the object, you can also test the conductive pad grounding leakage resistance.

1. Place the surface resistance of the product on the surface of the measured object.

2. Because it is easy to carry, suitable for on-site operation.

3. Built-in battery timer, do not worry about forget to replace the battery, the other use of environmentally friendly rechargeable batteries.

4. Measuring range: 103-1013Ω, can test a variety of product resistance value for conductive pads, conductive floors, conductive bags and other anti-static production inspection, maintenance, management and so on.

5. Can support the IEC International Electrotechnical Commission test standard mode (optional) IEC specifications of the electrode (contact area, weight) to meet the measurement standards.

① standard measurement mode

(Ohm per square, Surface Resistivity)

② resistance between the electrostatic pad and ground terminal measurement mode

(Ohms, Resistivity to Ground)

Use of ancillary accessories

③IEC specifications of the resistance measurement model

IEC standard electrode (contact area weight) of the standard measurement mode

①TEST

Green LED light: standard measurement mode

(Ohm per square, Surface Resistivity)

Red LED: Resistive measurement mode between the electrostatic pad and the ground terminal

(Ohms, Resistivity to Ground)

IEC resistance measurement mode display

② measured voltage display (10V, 100V)

Green LED lights: 10V output

Red LED lights: 100V output

Yellow LED: End of measurement

③ CHARGE

Red LED: Displays the battery charge