Mạch boost nâng áp từ Min 10V lên max 80v, công suất max 1200W tại ngõ ra 70V-18A và ngõ vào 60V-20A. Dòng điện ngõ vào max 20A/ ngõ ra max 18A.
Chuyên sử dụng cho loa kéo công suất lớn sửa dụng ắc quy 12V-20A chạy mạch công suất TPA3255 (600W). =>Xài cho loa kéo 4 tấc coil 51/63/75 (trở kháng 4-6 Ohm).
Hoặc xài cho các mạch điện tử khác cần điện áp cao hơn điện áp của ắc quy như mạch nạp Pin, mạch nguồn cho PLC 24V khi xài với ắc quy 12V,…
Module parameters:
Module model: SZ-BT07CCCV-A
Module name: 1200W boost constant current module
Module properties: non-isolated boost module (BOOST)
Input voltage: DC10-60V (directly input 10-60V without a jumper cap to select the voltage)
Input current: 20A (MAX) Please add a fan to dissipate heat if it exceeds 15A (with a fan to dissipate heat, the input current can reach 25A when the input voltage is 12-24V)
Static working current: 15mA (when 12V rises to 20V, the output The higher the voltage is, the static current will increase)
Output voltage: 12-83V continuously adjustable (the default output is adjusted to 19V for shipment, if you need to adjust to other voltage values, please explain. If you have a multimeter, the buyer can adjust it yourself)
12-83V Fixed output (for batch customers)
output current: 18A MAX over 10A, please strengthen heat dissipation (related to input and output pressure difference, the larger the pressure difference, the smaller the output current)
constant current range: 0.5-18A (+/-0.3A)
input Anti-reverse: yes (150A power MOS anti-reverse)
Low battery protection: yes (9-50V adjustable)
working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
working frequency: 150KHz
conversion efficiency: 92%-97% (efficiency and input, output voltage , current, voltage difference., small pressure difference and high efficiency)
input overcurrent protection: yes (input exceeds 25A, automatic protection, power supply does not boost)
short circuit protection: yes (input 30A fuse) double short circuit protection, safer to use.
Input reverse connection protection: Yes (150A power MOS tube anti-reverse. It can be reversed for a long time)
Installation method: 4 3mm copper pillars
Wiring method: terminal block (please use high-current pure copper wire)
Module size: length 130mm width 52mm Height 53mm
module single weight: 263 grams
Output power: = input voltage * 20A, such as: input 12V * 20A = 240W when input 12V, the maximum power is 240W input
voltage * 20A such as: input 24V * 20A = 480W, that is: input 24V The maximum power is 480W
Note: The maximum power is 240W when inputting 12V, the maximum power is 480W when inputting 24V, and the maximum power is 720W when inputting
36V. A 100V/470UF electrolytic capacitor. The 33MM ultra-high-power Sentinel magnetic ring is wound with three 1.2MM pure copper wires in parallel to prevent over-temperature magnetic saturation under large current conditions. Use a 116MM*58MM*14MM aluminum radiator to dissipate heat. And the heat sink has 5010 fan (5MM*5MM*10MM) installation holes; the output voltage and current of the imported power management chip are continuously adjustable. More importantly, the price is not expensive
– Mạch BOOST tăng áp DC – DC là sản phẩm chuyên dùng để tăng áp điện DC phù hợp cho các thiết bị điện tử – Sản phẩm có chức năng nâng điện áp DC với ngõ vào từ 10 ~ 60VDC, ngõ ra có thể điều chỉnh bằng chiết áp từ 12 ~ 83VDC. – Sản phẩm có kích thước nhỏ gọn và rất chắc chắn, các linh kiện bố trí rất gọn gàng và hợp lí, phù hợp với rất nhiều nhu cầu như học tập, nghiên cứu, DIY những bộ nguồn thí nghiệm, nguồn cho thiết bị dân dụng… – Tuỳ thuộc vào mục đích sử dụng mà chúng ta sẽ chọn cho mình một bộ sản phẩm phù hợp. THÔNG SỐ KĨ THUẬT – Điện áp ngõ vào: 10 – 60VDC – Dòng điện ngõ vào: tối đa 20A (lớn hơn 15A cần thêm bộ làm mát) – Điện áp ngõ ra: 12 – 83V (điều chỉnh bằng chiết áp CV) – Dòng tiêu thụ không tải: 15mA – Dòng tải tối đa: 18A ( lớn hơn 10A cần thêm quạt làm mát) – Dòng điều chỉnh: 0.5A – 18A (+/-0.3A – điều chỉnh bằng chiết áp CC) – Công suất ngõ ra: 1200W (max) – Nhiệt độ hoạt động: -40°C ~ +85°C – Tần số hoạt động: 150KHz – Hiệu suất chuyển đổi: 92% – 97% – Kích thước: 130×64×52mm – Chức năng bảo vệ: + Bảo vệ ngược cực: có + Bảo vệ pin yếu: có + Bảo vệ quá dòng: có + Bảo vệ ngắn mạch: có HƯỚNG DẪN ĐẤU NỐI Bước 1: – Kết nối điện áp đầu vào từ 10 – 60VDC tại 2 vị trí ngõ vào là IN + và IN – + Cực dương đầu vào kết nối với vi trí IN + + Cực âm đầu vào kết nối với vị trí IN – Bước 2: – Kết nối đầu ra với điện áp có thể điều chỉnh được dao động từ 12 – 80VDC + Cực dương đầu ra ứng với vị trí OUT+ + Cực âm đầu ra ứng với vị trí OUT – – ĐIều chỉnh thay đổi thông số điện áp, dòng điện tại 2 vị trí biến trở vi chỉnh như hình bên dưới.
-Lưu ý: – Cần phải đo đếm và tính toán được Dòng, áp vào-ra để khống chế CÔNG SUẤT RA- DÒNG ĐIỆN VÀO – ĐIỆN ÁP VÀO. Bất cứ điều kiện nào trong 3 điều kiện trên bị quá giới hạn đều gây hỏng mạch. Mạch có điện áp vào MIN 10V, dòng vào MAX 20A. Khi kích phải đảm bảo ko bị tụt áp, vì nếu tụt áp => tăng dòng vào để đảm bảo cs ra=> quá dòng đầu vào (20A) – CÔNG SUẤT ĐẦU RA =CÔNG SUẤT ĐẦU VÀO * 0,9 * 0,9 là hệ số chuyển đổi. Ví dụ: + Công suất đầu vào là 100W => công suất đầu ra là <=90W + Cần công suất đầu ra là 100W => công suất đầu vào cần cung cấp là 100*1,1=110W
Không có bình luận