Motor bước có gắn sẵn hộp số các loại 42,57,86 |
|
Mã sản phẩm: | 36PA5.2G/42BYGH40; 42BYGH47-G5K... |
Xuất xứ: | ... |
Thương hiệu: | ... |
Lượt xem: | 7.677 |
Trạng thái: | Còn hàng |
Liên hệ |
|
Liên hệ |
Các bạn đã có động cơ bước, bạn muốn có một chuyển động yêu cầu momen xoắn cực lớn, quay chậm? Chính xác?
=> Đã có loại động cơ bước gắn sẵn hộp số chuyên dụng chính xác, hoạt động êm ái và bền bỉ!!!
Loại 42 này có 2 kiểu:
1/ Thân motor dài 40mm
2/ Thân motor dài 47mm
Hàng luôn có sẵn!
1/ Loại thân dài 40mm(Motor 1.2A/phase- 4 leads):
Specification
- Model No: 36pA5.2G/47BYGH40
- Step Angle (degrees): 1.8
- 2 Phase
- Rated Voltage: 12V
- Rated Current: 1.6A@2.78V, 0.37A @ 12V
- Holding Torque: 3.5kg * cm (48.6 oz / in)
- Hold Torque with Gearbox: 18kg · cm (176N · cm)
- Gear Ratio: 5.18: 1
- Winding resistance: 1.5 Ω
- Winding inductance: 2.5 mH
- Max flux linkage: 1.8 Vs
- Step Angle Accuracy: ± 5% (full step, no load)
- Resistance Accuracy: ± 10%
- Inductance Accuracy: ± 20%
- Temperature Rise: 80 ° C Max. (Rated current, 2 phase on)
- Ambient Temperature: -20 ° C ~ + 50 ° C
- Insulation Class: B
- Dimension: 42 x 42 x 40mm
- Mounting: 4 x M3
- Mounting Hole Diameter: Φ28
2/ Loại thân dài 47mm(Motor 1.7A/phase- 4 leads):
Specification
- Model No: 36PA5.2G/42BYGH47
- Step Angle (degrees): 1.8
- 2 Phase
- Rated Voltage: 12-24V
- Rated Current: 1.7A/ phase
- Holding Torque: 0.55Nm
- Hold Torque with Gearbox: 2.75Nm
- Gear Ratio: 5.18: 1
- Winding resistance: 1.2 Ω
- Winding inductance: 2.7 mH
- Max flux linkage: 1.8 Vs
- Step Angle Accuracy: ± 5% (full step, no load)
- Resistance Accuracy: ± 10%
- Inductance Accuracy: ± 20%
- Temperature Rise: 80 ° C Max. (Rated current, 2 phase on)
- Ambient Temperature: -20 ° C ~ + 50 ° C
- Insulation Class: B
- Dimension: 42 x 42 x 47mm
- Mounting: 4 x M3
- Mounting Hole Diameter: Φ28
This is a stepper motor with gear box, using conventional 8mm diameter D output shaft type, model 36PA5.2G / 42BYG40(47)
The motor step angle 1.8 °, with a reduction ratio of 5.18 of planetary gearboxes.
Mounting panel 4x M3 threaded mounting holes, easy to install, reliable, can be applied to a variety of automated control systems
Note: Make sure to select the motor rated torque and overall and mounting dimensions and other parameters before the motor in order to select the appropriate model specifications.
Scenarios
- 3D printer
- Plotter
- Robot
- Automation and control systems
Không có bình luận